Drill It Inc Logo
Brian Schepper            515-707-6913

The Directional Drilling Specialist

Directional Drilling Contractor • Horizontal Boring • Underground Utilities Installation • Trenching • Plowing

Drill It, Inc. is an owner/operated horizontal directional drilling (HDD) company located in the Des Moines, Iowa metro area.  We have over 23 years experience in the directional drilling industry. Our goal is to deliver unsurpassed expertise and exceptional customer service on every job.

Brian Schepper - Owner


Owner, Brian Schepper, has worked in the underground industry since 1995. He has worked across the country installing electric, communication, water, sewer, drainage, geothermal header lines and geothermal systems.

He has completed bores as simple as driveway crossings to 1500 foot bores through solid rock and more complex bores such as installing a 6” on grade pipe into a storm intake with minimal clearance of existing utilities. Making this shot even more difficult was that the pipe could not be pulled behind the back reamer, the pipe had to be pushed back through the bore hole and into the storm intake.  

Russ Spencer - Drill Operator & Locator

Drill operator and locator, Russ Spencer, has worked in the underground industry since 1999.

He has extensive experience in the upper Midwest installing electric, communication, water, sewer, drainage, and geothermal header lines.

Russ’ significant skill, experience and patience allow us to complete difficult bores with a very high degree of accuracy.

Drill It, Inc. will hire only experienced, skilled drill operators and locators. We use the highest quality equipment and one of the most advanced electronic locating systems available. Our locating system is accurate within one inch at depth and within one tenth (0.10%) of a percent on grade bores.  All this gives us the ability to complete the most difficult shots with great accuracy, safety and efficiency.

Drill It, Inc. can complete the smallest bores to a 500+ foot water main bore to your most difficult, utility laden bores with the tightest tolerances. We take great pride in providing impeccable service and believe that no job is done until our customer is completely satisfied.

A Drill It, Inc. customer deals directly with either Brian or Russ during every stage of their project(s). This allows an exceptional level of personal customer service. We would love to show you why our customers keep coming back to us time and time again.  Give us a call, 515-707-6913 or Contact Us through this website.